7 Replies Latest reply on Sep 20, 2018 12:19 PM by rdawson_atg

    Is there a way to monitor the connected status of FXS ports?

    rdawson_atg New Member

      I am trying to find out if there is a way to determine whether an on-hook phone is connected to an FXS port?

        • Re: Is there a way to monitor the connected status of FXS ports?
          markfreeman Employee

          go into the fxs interface and issue "test line"

           

          see below for sample output. I have phone hooked up to 0/2 and no phone on 0/3. You see that 2 passed and 3 failed for the RInger test. And you can compare other results also.

           

           

          Tiger(config-fxs 0/2)#test line

           

           

          2018.09.20 12:39:41 FXS.0/2 Initiating Test.

          2018.09.20 12:39:41 FXS.0/2 Line Test in progress...

          Tiger(config-fxs 0/2)#

          2018.09.20 12:39:50 FXS.0/2

          2018.09.20 12:39:50 FXS.0/2   HPT            Pass             Loop Impedance

          2018.09.20 12:39:50 FXS.0/2   FEMF           Pass             Tip-Ring       8934956.00 Ohms

          2018.09.20 12:39:50 FXS.0/2   RFT            Pass             Tip-Ground     5305863.50 Ohms

          2018.09.20 12:39:50 FXS.0/2   Ringer         Pass             Ring-Ground    100000000.00 Ohms

          2018.09.20 12:39:50 FXS.0/2   ROH            Pass             REN               0.87 REN

          2018.09.20 12:39:50 FXS.0/2

          2018.09.20 12:39:50 FXS.0/2   Foreign Voltage

          2018.09.20 12:39:50 FXS.0/2   Tip-Ground  (ac)    0.00 Volts

          2018.09.20 12:39:50 FXS.0/2   Ring-Ground (ac)    0.00 Volts

          2018.09.20 12:39:50 FXS.0/2   Tip-Ground  (dc)    0.22 Volts

          2018.09.20 12:39:50 FXS.0/2   Ring-Ground (dc)   -0.04 Volts

          2018.09.20 12:39:50 FXS.0/2

          2018.09.20 12:39:50 FXS.0/2

          2018.09.20 12:39:52 FXS.0/2 Restoring service state.

          2018.09.20 12:39:52 FXS.0/2 Test complete.

          Tiger(config-fxs 0/2)#int fxs 0/3

          Tiger(config-fxs 0/3)#test line

           

           

          2018.09.20 12:40:03 FXS.0/3 Initiating Test.

          2018.09.20 12:40:03 FXS.0/3 Line Test in progress...

          Tiger(config-fxs 0/3)#

          2018.09.20 12:40:11 FXS.0/3

          2018.09.20 12:40:11 FXS.0/3   HPT            Pass             Loop Impedance

          2018.09.20 12:40:11 FXS.0/3   FEMF           Pass             Tip-Ring       26026618.00 Ohms

          2018.09.20 12:40:11 FXS.0/3   RFT            Pass             Tip-Ground     5210722.00 Ohms

          2018.09.20 12:40:11 FXS.0/3   Ringer         Fail             Ring-Ground    8447744.00 Ohms

          2018.09.20 12:40:11 FXS.0/3   ROH            Pass             REN               0.00 REN

          2018.09.20 12:40:11 FXS.0/3

          2018.09.20 12:40:11 FXS.0/3   Foreign Voltage

          2018.09.20 12:40:11 FXS.0/3   Tip-Ground  (ac)    0.00 Volts

          2018.09.20 12:40:11 FXS.0/3   Ring-Ground (ac)    0.00 Volts

          2018.09.20 12:40:11 FXS.0/3   Tip-Ground  (dc)    0.13 Volts

          2018.09.20 12:40:11 FXS.0/3   Ring-Ground (dc)    0.11 Volts

          2018.09.20 12:40:11 FXS.0/3

          2018.09.20 12:40:11 FXS.0/3

          2018.09.20 12:40:13 FXS.0/3 Restoring service state.

          2018.09.20 12:40:13 FXS.0/3 Test complete.

          Tiger(config-fxs 0/3)#