2 Replies Latest reply on Dec 5, 2018 12:17 PM by tnikoloff

    Buying used BSAP 1920

    tnikoloff New Member

      So i purchased a few BSAP1920 decommissioned from e-bay, these units were taken out of a working environment. they were able to be registered to my account and i was able to obtain the licence to add to my vWlan. I have the discovery dns setup and it shows up in my vWlan. however i'm unable to access via SSH do to the password or be able to factory default them from the vWLAN.  Is there is procedure to reset the AP to default factory settings?

      Thank you for your help...

      Tony

        • Re: Buying used BSAP 1920
          wmckin7 New Member

          How were you able to obtain a license, as I want to buy some AP's off ebay as well but they don't come with license.

           

          Thanks

            • Re: Buying used BSAP 1920
              tnikoloff New Member

              Just get the serial number off the units that you are buying before buying them. and go to the Adtran sight and pop them in and they should be able to register to the your. register them under your account and get the lic. Key and download the lic. File and upload to vWlan. if they are new you will have to buy the licence from a third party. if they were pulled from a working environment they most likely already had the lic paid for.