0 Replies Latest reply on Jan 14, 2019 4:27 PM by pacunetadmin

    How to configure bridge mode in NetVanta 3200 with 2 T1s

    pacunetadmin New Member

      Adtran Experts. I have the following question and I really need help.

      We are replacing old firewalls with embedded T1s with new firewalls with no T1s.

      We have an MPLS circuit with a multilink T1s.

      Per the vendor, I need to configure PPP.

      The vendor has provided /30 IPs for my mpls circuit.

      On my new firewall, I have assigned 192.168.0.10 IP on the MPLS interface with the next hop as the gateway.

       

      Since I don't have enough IPs. I want to configure the Router as bridge mode.

      So far this is the configuration I have created.

      Can you tell if I am missing something or is there a better way to configure it. Do I need to configure a router for the gateway?

       

      ! ADTRAN, Inc. OS version 18.02.01.00
      ! Boot ROM version 17.02.01.00
      ! Platform: NetVanta 3200, part number 1203860G1
      ! Serial number LBADTN1135AF337
      !
      !
      hostname "ROUTER"

      !
      clock timezone -8
      !
      ip subnet-zero
      ip classless
      no ip routing
      !
      no auto-config
      !
      event-history on
      no logging forwarding
      no logging email
      !
      no service password-encryption
      !
      banner motd #
                      ****** Important Banner Message ******

      Enable and Telnet passwords are configured to "password".
      HTTP and HTTPS default username is "admin" and password is "password".
      Please change them immediately.

      The ethernet 0/1 interface is enabled with an address of 10.10.10.1
      Telnet, HTTP, and HTTPS access are also enabled.
      To remove this message, while in configuration mode type "no banner motd".

                        ****** Important Banner Message ******

      #
      !
      ip policy-timeout tcp telnet 14400
      !
      no ip firewall alg msn
      no ip firewall alg mszone
      no ip firewall alg h323
      !

      no dot11ap access-point-control
      bridge irb
      !
      !
      bridge 1 protocol ieee
      !
      interface eth 0/1
        bridge-group 1
        no ip address
        no shutdown
      !
      !
      !
      !
      interface t1 1/1
        fdl none
        tdm-group 1 timeslots 1-24 speed 64
        no shutdown
      !
      interface t1 1/2
        fdl none
        tdm-group 1 timeslots 1-24 speed 64
        no shutdown
      !
      interface bvi 1
        description BVI 1
        mac-address 00:00:00:00:1B:FE
        no ip address
        ip mtu 1500
        no shutdown
      !
      interface ppp 1
        description PPP1
        ip unnumbered bvi 1
        ip mtu 1500
        ppp multilink
        no shutdown
        cross-connect 2 t1 1/2 1 ppp 1
        cross-connect 1 t1 1/1 1 ppp 1
      !
      no tftp server
      no tftp server overwrite
      ip http server
      ip http secure-server
      no snmp agent
      no ip ftp server
      no ip scp server
      no ip sntp server
      !

      ip sip udp 5060
      ip sip tcp 5060
      !
      line con 0
        no login
      !
      line telnet 0 4
        login
        password password
        no shutdown
      line ssh 0 4
        login local-userlist
        no shutdown