1 Reply Latest reply on Sep 11, 2019 3:46 PM by jayh

    Sending DNIS info on FXS ports

    aljohnson New Member

      Is it possible when ringing an FXS port on the TA924e to have the DNIS info sent to the POTs line in true DID fashion, vs the ANI info which is sent using FSK signaling?

       

      Alan Johnson

      Solutions Engineer

       

        • Re: Sending DNIS info on FXS ports
          jayh Hall_of_Fame

          Not with FXS. I'm pretty sure you can configure FXO ports for wink start or immediate DID which sounds like what you're after. There's a single FXO on the regular TA900e and you can order a special TA924e with eight on the Amphenol plus the one on the chassis. The signaling for DID must be DTMF. Rotary pulse and MF are not supported.