cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Adtran TA908e 3rd Gen T.38 on PRI

I see that the newer Adtran TA908e 3rd Gen supports up to 30 T.38 sessions. Can T.38 be enabled on the PRI interface or is it just available for the FXS ports?

Labels (3)
0 Kudos
2 Replies
Anonymous
Not applicable

Re: Adtran TA908e 3rd Gen T.38 on PRI

Hello,

Yes it can be enabled on the PRI interface as well.

Best regards

Anonymous
Not applicable

Re: Adtran TA908e 3rd Gen T.38 on PRI

i am using a 908E 2nd Gen and i tried enabling Fax on for the PRI and when i type modem-passthrough i am getting

Unrecognized command

i tried this on the PRI interface and on the T1 interface and on the SIP trunk

any adivce?

it does work on the FXS port i use them for firealarm and elivator