0 Replies Latest reply on Feb 5, 2020 9:41 AM by capepete

    change sip trunk source port ?

    capepete New Member

      is there a way to change the contact port for a sip trunk

      I have an instance where ONE trunk is accepting calls for either of the defined trunks

       

       

      eg a call routed to sip T02  is going to sip T01

      Trunks are registered with distinct account/user info

       

      The server is sending to the device on what it thinks is the appropriate channel/account

       

      All calls coming into the device are always coming in on the first channel

       

      I an thinking if the sip trunk source ports could be changed then the outbound calls would route to the proper channel, as the port would define the 'trunk'

       

      Thoughts ????

       

      --SIP Trunk Configuration --

      voice trunk T11 type sip

        description " SIP - Trunk1"

        match ani "NXX-NXX-XXXX" substitute "1-NXX-NXX-XXXX"

        sip-server primary *****.net

        registrar primary *****.net

        registrar threshold absolute 60

        outbound-proxy primary ******.net

        register 200250 auth-name "2000" password "AAAAAAAAAA"

        codec-list voip both

        authentication username "2000" password "AAAAAAAAAA"

      !

      voice trunk T12 type sip

        description "Voiceway SIP - Trunk2"

        match ani "NXX-NXX-XXXX" substitute "1-NXX-NXX-XXXX"

        sip-server primary *****.net

        registrar primary *****.net

        registrar threshold absolute 60

        outbound-proxy primary *****.net

        register 200251 auth-name "3000" password "BBBBBBBBBB"

        codec-list voip both

        authentication username "3000" password "BBBBBBBBBB"

      !